4K HDMI延长器带KVM远程控制，HDBaseT2.0无压缩传输技术，可将HDMI，USB，电力，控制信号零延迟传输100米
SKU: 4KEX100-KVM-H2
¥3,945.00
HDBaseT延长技术:
一条CAT网线可同时传输音频、视频、USB、电力、控制信号
100米零延迟传输:
通过单根Cat 6/6a/7网线可将HDMI信号零延迟传输100米远
4K@60Hz视觉无损:
采用DSC视觉无损压缩算法，分辨率高达4K@60Hz 4:4:4 8bit
HDR视效栩栩如生:
支持HDR10和杜比视界极致视效，带来叹为观止的细节表现
KVM远程管理控制:
搭载4个高速USB2.0端口，可通过键鼠等外设远程控制主机
In stock
High-End 100m/330ft 4K KVM Extender
4KEX100-KVM-H2 is a 100m/330ft 4K@60 444 HDR HDBaseT Extender. The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. It provides HDMI transmission up to 330 feet (100 meters) over category cable. It supports bi-directional Ethernet pass-through, RS-232, bi-directional IR control and Bi-direction analog audio. Built-in one-way PoH, the receiver can be powered by the transmitter. The extender features visually lossless VESA Display Stream Compression (DSC) to enable HDR and 4K/60 4:4:4 video signal extension over HDBaseT. It also supports one USB host and 4 USB device ports switchable for KVM usage.
Main Features:
- HDMI Input/Output supports resolutions up to 4K@60Hz 4:4:4 8 bit
- Visual lossless DSC compression solution
- HDCP 2.2 compliant
- Supports HDR formats including HDR10 and Dolby Vision
- Transmits HDBaseT signal up to 100m/330ft for 4K and 1080P via a single Cat 6/6a/7 cable
- Transmits HDBaseT signal up to 90m/295ft for 4K and 100m/330ft for 1080P via a single Cat 5e cable
- Bi-directional IR, RS232 pass-through over HDBaseT
- Provides one USB Host and four USB Device ports for remote KVM control
- Supports one-way standard PoH, one power adapter on the transmitter can power both units
- Automatic EDID management
- Note: The kit supports Dolby Vision only if the resolution is less than or equal to 4K@30Hz.
双向IR透传，操作超简单
通过双向IR红外信号透传，你可以轻松在远端控制本地信号源设备播放内容，或在本地控制远端显示设备。
KVM Extension
The extender provides remote source PC control with keyboard and mouse, interactive display operation, data transmission and USB streaming over distances up to 330ft/100m. High-speed USB 2.0 up to 480Mbps passes through over HDBaseT with zero delay.
单向PoH供电，布线更方便
只需将电源适配器连接到发射器，即可同时为发射器和接收器供电，解决安装布线时不易找电源的问题。
One-Way PoH
With PoH integrated inside, the extender needs only one power supply connected to TX to power both units. Its power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.
规格
| 技术参数 | |
| 视频信号 | HDMI高达4K@60Hz 4:4:4, HDCP 2.2 |
| 输入/输出分辨率支持 | 800×6008, 1024×7688, 1280×7208, 1280×7688, 1280×8008, 1280×9608, 1280×10248, 1360×7688, 1366×7688, 1440×9008, 1600×9008, 1600×12008, 1680×10508, 1920×10808, 1920×12008, 2560×14408, 2560×16008, 3840x2160P2,3,5,6,81 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz,8 = 60 Hz; |
| HDR格式支持 | HDR 10杜比视界 (分辨率在4K@30Hz以下才支持) |
| 音频格式支持 | HDMI: 完全支持HDMI 2.0规范的音频格式, 包括 PCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS:X3.5mm Mini插孔: 立体声 |
| 最高数据速率 | 18 Gbps |
| 一般参数 | |
| 工作温度 | 0°C 至 + 45°C (32 至 + 113 °F) |
| 贮存温度 | -20 至 +70°C (-4 至 + 158 °F) |
| 湿度 | 20% 至 90%, 非冷凝 |
| 功耗(最大) | 17.8W (一对) |
| 产品尺寸(W x H x D) | 245mm x 25mm x 90.2mm/9.6’’ x 1’’ x 3.55’’ |
| 产品重量 | 发射器/接收器: 0.66kg/1.45lb |
产品包装
- 发射器 x 1
- 接收器 x1
- 电源适配器 (DC 12V 3A) x 1
- 红外发射线 x1
- 宽频红外接收线(30 KHz ~ 50 KHz) x 1
- 凤凰端子公头 (3.5mm, 3 针) x 2
- USB 2.0 Type-B 转 Type-A 线 (1.5米) x 1
- 安装支架 (带螺丝) x 4
- 用户手册 x 1
Documents & Softwares
常见问题
KVM延长器将视频和USB信号延伸到远程并进行控制管理。它们广泛用于数据控制中心、安全监视系统、视频游戏装置等。
HDCP代表高带宽数字内容保护。该协议的形成是为了保护数字音频和视频内容不被复制和传播。
该设备只支持用一根以太网电缆从发射器直接连接到接收器。因此，如果你将它连接到交换机上，它将无法工作。
是的。这款产品支持HDMI 2.0信号和HDCP 2.2直通。
这款产品最高支持 4:4:4 色度采样的4K@60Hz视频。
Reviews
There are no reviews yet